Dascom Tally LA650+ Kurzanleitung Seite 23

Quick Start-en.book Seite 21 Freitag, 16. Oktober 2009 1:20 13
Quick start guide
Open the coloured latch lever and align the tractor so that the
first printing position on the paper matches the
printer housing.
Lock the coloured lever again.
Place fanfold paper into the left-hand tractor.
Open the coloured latch lever of the right-hand tractor and
align it to the paper width.
Insert the fanfold paper into the right-hand tractor.
Make sure that it is inserted by the same length as on the left-
hand tractor in order to avoid any paper jam.
Close the tractor flap and lock the tractor by turning the trac-
tor lever to the rear.
Do not tension the paper excessively to avoid tear-
ing the perforation holes; do not allow excessive
slack since in this case the paper will bulge and
there may be problems in the feeding process.
Paper handling
X mark on the
21