Installation Instructions - Proklima GPC12AJ Bedienungsanleitung

Installation instructions

Installation in a double-hung sash window
1
Attach the guard combined above to
the window panel
Push the insect guard net firmly to
ensure that its four projections fit into
the holes in the window panel.
2
Cut the foam seal A (adhesive type) to
the proper length and attach it to the
window stool.
3
Attach the window panel to the window
stool.
If the inner width of the window is
between 22" (559mm) and 24" (609mm)
inclusive.
The window panel cannot be installed in
windows less than 22" (559mm) wide,
as you will be unable to shut the exhaust
cover.
(1) Remove the adjustment panel from
the window panel, and cut the window
panel to the same width as the window.
(2) Open the window sash and place the
window panel on the window stool
(3) Secure the window panel to the
window stool with 2 screws.
Projection
Window
panel
22"~ 24"
68
Foam seal A
(adhesive type)
Exhausr cover
Cut
Adjustment panel
Window panel
Window stool