Connecting Cables - Eizo FORIS FX2431 Installationshandbuch

Prior to use

Connecting Cables

1
Connect each device.
• Connect a PC . ...........................................See below
• Connect a USB device . ................................ Page 10
• Connect an AV device .................................. Page 11
• Connect an audio device ............................. Page 1
●
Connect a PC
Attention
• When replacing the current monitor with an FX2431 monitor, be sure to change the PC settings for
resolution and vertical frequency to those which are available for the FX2431 monitor referring to the
resolution table (see page ) before connecting the PC.
1. Connect the monitor to the PC with a signal cable that matches the connectors.
After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
• When connecting to PC1 input (digital signal connection)
Connectors on the
PC
DVI connector
Audio output
connector
USB
Downstream
Installation Setting/Adjustment
Signal cable FD-C39 (supplied)
Audio cable *
(stereo mini jack to stereo mini jack)
USB cable MD-C93 (supplied) *
* 1
P lease purchase the cable.
* 
W hen connecting two PCs to the monitor,
please purchase another cable.
Troubleshooting
Connectors on the
DVI-D connector
1
2
monitor
Audio input
connector
USB
Upstream
7