Inhaltsverzeichnis
Werbung
Problem
The
appliance
does not
work.
Skin irritation
occurs.
The cooling
glove is not
cold enough.
Cause
You moistened
your skin with
water or a
cream or other
skincare
product prior to
epilation.
The socket to
which the
appliance is
connected is
not live.
The appliance is
not switched on.
You did not
attach the
epilating head
correctly.
You used the
epilator for the
first time or
after a long
period of disuse.
You did not put
the ice gel pad
in the freezer or
freezing
compartment.
Solution
Make sure your skin is entirely dry
and free from grease. Do not put
any cream, body milk or other
skincare product on your skin before
you start epilating.
Make sure the socket you use is live.
If you use a socket in a bathroom
cabinet, you may need to switch on
the light to activate the socket.
Make sure that the appliance is
connected to the mains and
switched on.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home ('click').
Some skin irritation may occur the
first few times you use the appliance.
This is normal and usually disappears
quickly. For tips to reduce skin
irritation, see the first section of
chapter 'Using the appliance'. Also
make sure you keep the epilating
head clean.
Put the ice gel pad in the freezer or
freezing compartment (***) for at
least 2 hours. Do not store the ice
gel pad in the refrigerator.
EnglisH
15
Werbung
Inhaltsverzeichnis
