Milnor 42044CP2 Wartung Seite 11

3.1.4.2. Procedures for Motors
3.1.5. Maintenance Components—Machines and Controls
Group
(Document BIUUUM10)
Sections
7
Table of Contents
Figures, Tables, and Supplements
Figure 6: Motor Grease Maintenance
Conditions
Table 11: Motor Grease Intervals and
Quantities. Use grease EM (Table 10)
Supplement 1: How to Examine Belts and
Pulleys
Figure 7: Belt and Pulley Conditions To
Look For. See Supplement 1.
Figure 8: Electric Box and Inverter. These
are examples. Your machine can look
different.
Figure 9: Chemical Inlet Manifolds for
Chemical Pump Systems. See caution
statement 26 . These are examples.
Your machine can look different.
Figure 10: Soap Chute and Optional
5-compartment Supply Injector.
These are examples. Your machine
can look different.
Figure 11: Air Tube for the Water Level
Sensor. These are examples. Your
machine can look different.
Figure 12: Steam Inlet Strainer. These are
examples. Your machine can look
different.
Figure 13: Compressed Air Inlet Strainers.
These are examples. Your machine
can look different.
Supplement 2: How to Examine
Compressed Air Mechanisms
Figure 14: Compressed Air Mechanisms.
These are examples. Your machine
can look different.
Figure 15: Proximity Switches These are
examples. Your machine can look
different.
PELLERIN MILNOR CORPORATION