Installation - Gorenje Tiki TEG 0520 O/ A Bedienungsanleitung

Dear buyer, thank you for purchasing our product.
Prior to the installation and first use of the electric water
heater, please read these instructions carefully.
This water heater has been manufactured in compliance with the relevant standards
and tested by the relevant authorities as indicated by the Safety Certificate and the
Electromagnetic Compatibility Certificate. The technical characteristics of the product
are listed on the label affixed between the inlet and outlet pipes. The installation must
be carried out by qualified staff. All repairs and maintenance work within the water
heater, e.g. lime removal, must be carried out by an authorised maintenance service
provider.

INSTALLATION

The water heater shall be built in according to the drawing and table with dimensions
in a premise where there is no frost, as close as possible to the water outlets. It has
to be fitted to the wall using appropriate wall screws with a minimum diameter of 5
mm.
With regard to the needs, you can chose execution above the sink (TEG 0520 O/A;
TEG 1020 O/A) or an execution under the sink (TEG 0520 U/A; TEG 1020 U/A).
A
TEG 0520 O/A 390
TEG 0520 U/A 390
TEG 1020 O/A 471
TEG 1020 U/A 471
Connection and installation dimensions of the water heater [mm
D
140
100
Execution above the sink
B C D E
264 256 213
138 256 213
371 310 265
196 310 265
E
70 G 1/2
100 70
140
D E
Execution under the sink
G 3/8
11