Sony SCA-S30 Bedienungsanleitung Seite 43

B Use washers and nuts to secure the speaker.
5
Connect the audio signal cable and power cables to the speaker.
A Loosen the adjustment bolts on the left and right sides of the speaker as much as
possible, and adjust the angle of the speaker as shown.
Adjustment bolts (left and right)
B Connect the audio signal cable to the AUDIO IN connector, the power cables to the
power input connector (24 V AC), and the grounding wire to the grounding terminal
(U).
• Secure the audio signal cable onto the cable holder to prevent disconnections.
• The unit should always be grounded.
AUDIO IN connector
Cable holder
Power cable
Audio signal cable
Power input connector (24 V AC)
Power cable
Grounding terminal (U)
Installation 17
GB