Specifications - AXTON C109 Einbauanleitung Und Bedienungsanleitung

I

SPECIFICATIONS

AXTON
Rated power output stereo (at 13.8V) at 4 Ohms (W RMS) min.
Rated power output stereo (at 13.8V) at 2 Ohms (W RMS) min.
Rated power output bridged (at 13.8V) at 4 Ohms (W RMS) min.
Frequency response (Hz)
Total Harmonic Distortion (THD) at 4 Ohms (%)
Signal to noise ratio (dB)
Channel separation (dB)
Crossover slope (dB/oct)
Crossover range low/highpass state-variable (Hz) HPF
Recommended power cable cross-section with approx. 5 m (mm²)
Input impedance (kOhms)
Input sensitivity (V)
Damping factor @4 Ohms
Thermal cut-off (°C)
Fuse (A)
Recommended main fuse on battery side with 20mm² power cable (A)
Dimensions (W x H x L in mm)
Specifications subject to change without notice.
42 42
C109
1 x 300
1 x 420
n. a.
10 - 30'000
< 0.05
> 95
n. a.
12/12
LPF 10-60/30-300
od.
0.2 - 9
> 250
2 x 25
311 x 53 x 210
AXTON is a registred trademark of ACR AG, Bohrturmweg 1, CH-5330 Zurzach, Switzerland.
C209
2 x 60
2 x 95
1 x 180
10 - 30'000 10 - 30'000
< 0.05
> 95
> 55
12/12
40-240
20 8-20
47 47
0.2 - 9
> 250
80 80
1 x 25
60 30-40
256 x 53 x 210 256 x 53 x 311
C409 C509
2 x 120 4 x 60
2 x 180 4 x 90
1 x 350 2 x 190
10 - 30'000
< 0.05 < 0.05
> 95 > 95
> 55 > 55
12/12 12/12
40-240 40-240
20 20
47 47
0.2 - 9 0.2 - 9 V
> 250 > 250
80 80
2 x 25 3 x 25
60 60
256 x 53 x 311