Resetting The Check Filter Indicator; Cleaning The Dust Sensor Lens - Levoit LV-PUR131S Bedienungsanleitung

Resetting the Check Filter Indicator

Reset the Check Filter Indicator after changing the air filters.
1. Plug in the air purifier and turn it on.
2. Locate the button vent on the side of the air purifier.
[Figure 3.1]
Figure 3.1
3. Use a pen, pencil, or small object to press the black
Filter Indicator Reset Button inside the vent. Press and
hold for 10 seconds. [Figure
4. The Check Filter Indicator will turn off, indicating that the
reset is complete.
Figure 3.2
3.2]

Cleaning the Dust Sensor Lens

1. Turn off and unplug the air purifier.
2. Open the dust sensor cover.
Figure 4.1
3. Use a cotton swab, dipped in water, to clean the dust
sensor lens. [Figure 4.2]
4. Wipe the lens dry with a dry cotton swab.
Figure 4.2
NOTE: Do not remove the foam piece attached to the dust sensor
cover unless instructed by Customer Support.
[Figure 4.1]
[Figure 4.3]
Figure 4.3
EN
13