Basic Operations; Turning Headset On/Off; Choosing Wearing Preference; Making A Call - Samsung WEP150 Handbuch

BASIC OPERATIONS

6

Turning headset on/off

What you do
Turning Press and hold for 3
headset on to 5 seconds until you see a
burst of 4 flashes on the blue
indicator light, then release
Turning Press and hold for 3
headset off to 5 seconds until you see a
burst of 2 flashes on the blue
indicator light, then release
Status indicators
What you hear
What you see
Quick series of 2 tones
Flashes every
– (when active mode starts)
8 seconds
Quick series of 2 tones
Flashes every
– (when standby mode starts)
3 seconds
5 tones every 20 seconds
Red flashes
instead of Blue
* Depending on phone type and usage.
IMPORTANT: Do not hold the
turning the headset on or else it may go into pairing mode, and the blue indicator light
will turn solid. If that happens, turn off the headset, wait 3 to 5 seconds, and repeat
process for turning the headset on.
6
What you hear What you see
Single tone The blue indicator light
will flash while the
power is on (see Status
indicators table below)
Series of 2 tones The blue indicator light
will stop flashing
Status
5
Active Mode
•
Call in progress
•
Up to 8 hours of talk-time*
6
Standby Mode
•
Waiting for call
•
Up to 200 hours of standby time*
Low Battery
•
3 – 5 minutes of talk time left
button down for more than 3 to 5 seconds when
7

Choosing wearing preference

Samsung Bluetooth headset WEP150 is ready to wear on the
right ear. If you prefer the left, gently rotate the ear hook.
For optimal performance, wear Samsung WEP150 and
your Bluetooth phone on the same side of your body. In
general, you will get better performance when there are no
obstructions (including parts of your body) between the
headset and the phone.
8

Making a call

If headset is off, turn it on now (see Turning headset on/off section).
Using phone's keypad
1. Dial number on keypad.
2. Press phone's "send" key.
Using voice-activated dialing (after you've set up voice tags on your phone)
1. Long Press and release once.
2. You'll then hear the voice-activation tone; say the name of the person you wish to call.
NOTE: Record voice tag from headset for better reception.
Fig. 5
7