Safety; Intended Use - WIKA 53 Betriebsanleitung

2. Safety

2. Safety
GB

2.1 Intended use

These bimetal thermometers are used for measuring temperature in
hazardous areas of industrial applications.
The bimetal thermometer has been designed and built solely for the
intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the bimetal
thermometer outside of its technical specifications requires the
instrument to be taken out of service immediately and inspected by
an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
6
WARNING!
Before installation, commissioning and operation,
ensure that the appropriate bimetal thermometer has
been selected in terms of measuring range, design and
specific measuring conditions. The compatibility of the
wetted parts of the process connection (thermowell,
thermowell stem) with the medium must be tested.
Non-observance can result in serious injury and/or
damage to equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
WIKA operating instructions models 53, 54, 55 (ATEX)