Denver Instrument Denver MAXX Betriebsanleitung Seite 7

Leveling the Balance/Scale
(only for model MXX-123)
§ Always level the balance/scale
again any time after it has been
moved to a different location.
Example: moving bubble from
R to L
§ Turn the feet as shown in the
diagram until the air bubble is cen-
tered within the circle of the level
indicator.
> In most cases this will require
several adjustment steps.
Removing Weights for
Calibration/Span Adjustment
(only for models MXX-612, MXX-412,
MXX-212, MXX-601, MXX-123)
§ Grasp the tab to turn and pull out
the weight compartment.
$ Follow instructions on page 15 for
calibration/span adjustment.
Warmup Time for Model MXX-123:
To ensure accurate results, the scale
must warm up for 1 hour before
operation. Only after this time will
the scale have reached the required
operating temperature.
7