Manual Operation For Watering - FLORABEST HG04678 Bedienungs- Und Sicherheitshinweise

The display on the "Prog"
will flash on screen.
8. Turn the rotary button until the
cursor on the "watering
days" section flash.
Select each watering day
and confirm by pressing the
SET button
After select the watering
days, press the
button to final confirm.
6
The display on the "Prog"
will flash on screen.
9. Select the "Prog ON" with
the rotary button and confirm
by pressing the SET button
(or you can select OFF if
4
you don't want to activate the
program at this moment).
After setting up the first pro-
gram, the system will now
jump back to step 2, so you
can set up program No. 2–6.
When you have finished set-
ting up the programs, you
can press the
button to exit the program-
7
ming mode and go back to
the normal operation mode.
(see Fig. 11).
4
(ON/OFF)
Remark: In case you input a
wrong data, you can always press
the (ON/OFF) button
to previous step.
Manual operation
for watering
The valve can be opened or
closed manually at any time.
A program-controlled open valve
can be closed early without chang-
ing the program data (watering
start time, run time and frequency).
1. Press the
approx. 2 seconds to open
the valve manually (or just
press the
close an opened valve).
2. Press the SET button
you want to set a specific
duration.
The hour display on the
"Run Time" section will
flash on screen.
3. Set the hour of the watering
time and confirm with the SET)
button .
4
to go
7
button for
6
button to
6
if
4
GB/MT 87