Crease Tool; Protective Cover For Sensitive Fabrics; Protective Glove - Silvercrest SDGS 1630 A1 Bedienungsanleitung Und Sicherheitshinweise

Crease tool

The supplied crease tool
1) Before you switch on the appliance, fully attach the hook on the supplied
crease tool
2) Press the handle to open the crease tool
3) Place the clothing between the crease tool
go of the handle .
4) Switch the appliance on and start at the top of the clothing . Slowly move the
crease tool
5) Switch the appliance off, remove the plug from the power socket and allow the
appliance to cool down completely .
6) Detach the crease tool
mount on the bottom of the steam head

Protective cover for sensitive fabrics

You should use the supplied protective cover
as silk or velour .
♦

Protective glove

Wear the protective glove
an item of clothing and inserting your hands into the sleeves to stretch the fabric .
You can hold the steam head
SDGS 1630 A1
into the mount on the bottom of the steam head
a
downward (fig . V) .
a
U
Before you switch on the appliance, pull the protective cover
the steam head .
1
helps you to renew or create creases .
a
.
a
a
by pulling the hook of the crease tool
a
.
1
V
s
if, for instance, you are steam-ironing the sleeves of
d
close to the fabric without burning your hand .
1
(fig . U) .
1
and the steam head
1
a
to press sensitive fabrics, such
fully over
s
GB │ MT
and let
out of the
│ 87 ■