Programmes - Silvercrest SHFR 1450 A1 Bedienungsanleitung

NOTE
► Check the cooking process regularly.
preprogrammed values in the appliance are orientation guides. The actual
cooking times
► You can open the lid
or to add ingredients.
switches off until the lid
► You can manually adjust the time and temperature while cooking by press-
ing the SET button
► To stop cooking at any time, press and hold the ON/OFF button
for approx. 3 seconds. The appliance will switch back to standby mode;
the display
► Use the supplied stand

Programmes

The appliance has eight preset cooking programmes. If you select one of the
following programmes, the preset cooking times and temperatures will be shown
on the display
on the recipe you are using or your personal taste.
The three manual programmes offer further customisable presets for those times
when none of the other programmes are suitable. You can use them for your own
recipes, for example, or for keeping food warm.
NOTE
► The possible setting range for temperature and time varies depending on
the programme. See the following table.
How to set a programme:
1) Choose a suitable programme, as described in the section Before first
use.You will find all the settings of the preset programmes in the following
table.
2) Press the ON/OFF button
ature according to your needs, as described in the section Preparing food.
SHFR 1450 A1
can vary depending on the characteristics of the food.
during cooking to check on the cooking progress
When you open the lid
is closed again.
and continuing as described above.
lights up blue.
when you put down the hot cooking container
. These settings can be adjusted to certain degree depending
to start immediately or adjust the time and temper-
The times given in the table and the
, the heating element
GB │ MT
button
.
│ 83 ■