Problems And Solutions - Silvercrest SUR 46 A1 Bedienungs- Und Sicherheitshinweise

Cleaning and Care / Problems and Solutions
Do not make any modifications to the device or the connection
cable. All repairs should only be carried out by the service centre
or an authorised specialist workshop.

Problems and Solutions

Problem /
Fault
The device is
connected to the
power supply
but the display
is blank
2
The object to be
cleaned remains
dirty.
Possible
Cause(s)
The mains plug
is not cor-
12
rectly inserted.
No power
supply.
The mains lead
is broken.
The timer was
not started.
There is no or
too little water
in the stainless
steel tank .
7
No detergent
was added.
Solution
Insert the mains plug
in the power socket.
If necessary, have the 230 V
socket to which the device is con-
nected or the installation checked
by a professional electrician.
Repairs should only be carried
out by a specialist dealer.
Switch on the timer with the
On-switch .
1
The stainless steel tank
be filled up to the "MAX" mark
with normal tap water or a
cleaning mixture (see the sections
"Operation" and "Cleaning
Methods").
Add cleaning concentrate
according to the type of soiling
(see the section on "Cleaning
Methods").
firmly
12
can
7
GB 21