User Interface And Navigation; Display Description - Hach sensION + PH3 Bedienungsanleitung

User interface and navigation

User interface
Keypad description
1 CALIBRATION key: start a
calibration , view calibration data
and change the calibration
frequency
2 TEMPERATURE and STIRRER
key: change the temperature (°C,
°F) or the stirring speed
3 UP key: scroll to other options,
change a value
4 pH measurement key: start a pH
measurement

Display description

The meter display shows the concentration, units, temperature,
calibration status, date and time.
5 DOWN key: scroll to other options,
change a value
6 ON/OFF: turn on or turn off the
meter
7 mV measurement key: start a ORP
(mV) measurement
Figure 4 Single screen display
1 Measurement unit and value (pH,
ORP (mV))
2 Measurement mode or time and
date
Navigation
Use the calibrate key to calibrate the probe. Use the parameter key
to take a sample measurement. Use the TEMPERATURE and STIRRER
key to change the temperature (°C, °F) or the stirring speed. Use
the arrow keys to scroll to other options or to change a value.
Be sure to look at the display during tasks as the screens change
quickly. Refer to each task for specific instructions.
Startup
Turn the meter on and off
N O T I C E
Make sure that the probe is connected to the meter before the meter is turned on.
Push to turn on or turn off the meter. If the meter does not turn on,
make sure that the AC power supply is properly connected to an
electrical outlet.
Change the language
The display language is selected when the meter is powered on for the
first time.
3 Sample temperature (ºC or ºF)
4 Visual measurement timer
English 7