Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fax +32 2 359 95 50
OPERATING INSTRUCTIONS FOR YOUR ULTRAVIOLET VACUUM CLEANER FOR MITES & BACTERIA
What is the UV vacuum cleaner for mites & bacteria?
The UV vacuum cleaner for mites & bacteria has been developed to clean and disinfect
mattresses, bed linens and soft upholstery, by combining suction power, HEPA filter and UV
technology.
What is UV-C?
UV stands for ultraviolet radiation. C stands for the special frequency of the germ-killing UV
light.
UV-C is a short-wavelength, for the eye invisible ultraviolet light in the wavelength range of
200/280 nanometre. It has been used for more than a 100 years in hospitals for sterilisation. UV-
C (UVC) is also known as UVGI (ultraviolet germicidal irradiation).
How does it work?
UV-C penetrates the outer cell structure and alters the DNA molecule, preventing replication
and causing them to die. This process has been proven to be extremely effective against
house dust mites and bed bugs, as well as fungus and bacteria such as E-coli and
Staphylococcus.
What is a HEPA filter?
HEPA is an acronym for "high efficiency particulate air". HEPA is a type of filter that can trap
a large amount of very small particles that other vacuum cleaners would simply re-circulate
back into the air of your home.
HEPA filters are composed of a mat of randomly arranged fibres and are critical in the
prevention of the spread of allergies, airborne bacterial and viral organisms.
Frequency of use
The age of your mattress, pillows and soft furnishings determines how often you will need to
use your Ultra Vac.
For newer mattresses, pillows and soft furnishings, it is recommended that you clean at least
once a week.
For older mattresses, pillows and soft furnishings, it is recommended that you clean at least 2
to 3 times per week.
Copies of the I/B. Please reproduce them without any
changes
except
under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
To release the power cable first pull and
lift the bottom power cable hook into the
upright position. Now slide the power cable
from its housing and unwind. When you are
finished using the appliance, lower the power
cable hook into its original position, click
back into place and then proceed to wind-
up the power cable around both parts.
13
Assembly page 13/32
special
instruction
from
TKG HSS 1004 - 160728
Team
Werbung
Inhaltsverzeichnis
