Inhaltsverzeichnis
Werbung
INTRODUCTION
LED MOVING HEAD AURO SPOT ZOOM 300
CLASZ300
CONTROL FUNCTIONS:
17-channel and 20-channel DMX control
Master/Slave mode
Stand-alone functions:
PROPERTIES:
LED moving head with 200 W LED. Color wheel and two gobo wheels. Zoom function. Focus. Frost filter. Two prisms. Two DMX modes. DMX-
512 control. Master/Slave mode. Stand-alone functions. Two omega mounting brackets included. Operating voltage: 100V–240 V AC / 50–60 Hz.
Power consumption: 320 W.
The spotlight complies with the RDM standard (Remote Device Management). This device manager allows the user to request the status of
and configure RDM end devices via an RDM-capable controller.
CONNECTIONS, CONTROLS, AND DISPLAY ELEMENTS
1
1
POWER IN
Neutrik powerCON mains input socket. Operating voltage: 100–240 V AC / 50–60 Hz. A suitable power cable is included in delivery.
2
POWER OUT
Neutrik powerCON mains output socket. Serves to provide power to additional CAMEO spotlights. Ensure that the total power consumption
of all devices connected to the device does not exceed the given ampere (A) value.
3
FUSE HOLDER
IMPORTANT NOTE: Exclusively replace the fuse with a fuse of the same type and values. If a fuse trips repeatedly, please contact an autho-
rized service center.
4
DMX IN
Male three-pin XLR connector to connect a DMX control device (e.g. DMX console).
5
DMX OUT
Female three-pin XLR connector to transmit the DMX control signal.
6
DMX IN
Male five-pin XLR connector to connect a DMX control device (e.g. DMX console).
7
DMX OUT
Female five-pin XLR connector to transmit the DMX control signal.
4
4
3
3
6
6
5
5
2
7
7
5
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
