Bosch VLH 2140 Erstinbetriebnahme Seite 28

en 28 | VLH 2140 | Installation
3.2.2 Unpacking components
1. Use a fork-lift truck or crane to move the pallets to
the planned lifting platform location.
Fig. 5: Packing units at installation location (example)
1 Pallet with lifting platform
2 Pallet with lifting column extensions
2. Remove the packaging material.
Fig. 6: Removing packaging material
3. Take out all the loose components and place them
on a suitable vacant surface.
Fig. 7: Setting down loose components (example)
3.2.3 Detaching transportation frame
1. Unscrew the ring gears from the support arms.
2. Pull out the pins and detach the support arms from
the transportation frame.
|
1 689 978 569 2017-08-02
Fig. 8: Detaching support arms from transportation frame
1 Bolt
2 Transportation frame
3 Ring gear
4 Pin
5 Support arm
3. Raise the lifting columns in the center with a
lift truck. Place cardboard underneath to avoid
scratching the lifting platform.
4. Slacken off all bolts at the transportation frame and
remove. Detach the transportation frame.
Fig. 9: Detaching transportation frame
1 Lift truck
2 Cardboard layer
3 Lifting column base plate
4 Transportation frame
Robert Bosch GmbH