Sound And Light Signalization; Stay Home Mode; Slave Mode; Owner Authorization Devices And Functions - Pandora Camper Bedienungsanleitung

• Fuel level (status)
• Parking (automatic gearbox) /Handbrake (manual gearbox) status
• "Parking light is not turned off" notification (status)
• Shock sensor (security zone – alarm and warning level)
• Motion sensor (security zone – alarm level)
• Tilt sensor (security zone – alarm level)
• OE alarm system status via CAN, additional sensor (status, security zone – alarm and warning level)
• Turning ignition on (status, security zone – alarm level)
• Opening doors (status, security zone – alarm level)
• Opening a trunk (status, security zone – alarm level)
• Opening a hood (status, security zone – alarm level)
• Pressing brake (status, security zone – alarm level)

Sound and light signalization

DESCRIPTION
Arming
Disarming
Car search
Alarm, PANIC mode
Warning level of a sensor is triggerd
'Sensors were triggered' signal when disarming /
Parking light is not turned off notification /
'Sensors are triggered" signal when arming
Engine blocking warning in Anti-Hi-Jack mode
12
STATE
(sound/light)
1х /1х
2х /2х
5х /5х
30sec. /30sec.
3х /1х
4х /4х
30sec. /30sec.
SECURITY-SERVICE SYSTEM PANDORA CAMPER

Stay Home mode

This mode is used to control the outer perimeter of a vehicle during parking when passengers are inside
the vehicle. This mode allows the system to protect your vehicle against intrusion through the parts of
the vehicle that can be open.
• The system will be armed silently when you activate the "Stay Home" mode, it will be confirmed
with 1х light signal. The system controls vehicle security zones and an additional gas sensor (it is
not included in the set) in this mode, built-in sensors (shock/tilt/motion) are disabled in this mode.
• The system will be disarmed when you deactivate the "Stay Home" mode, it will be confirmed with
2х sound and 1х light signals.

Slave mode

This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle.
!
T
his mode is enabled by defaulT for a digiTal proTocol
"p
recommended To acTivaTe The rohibiT disarming when a Tag is absenT
. i ,
mode f This mode is acTivaTed iT will be possible To disarm The sysTem only when a Tag is in The coverage zone or using
"s pin- ".
The ecreT code

Owner authorization devices and functions

Authorization devices
Authorization devices are Bluetooth-devices used to recognize an owner in the radio coverage zone
of the base unit. These devices allow implementing security and anti-hijack functions. You can use a
mobile phone, a radio tag BT-760 or a remote control D030 as an authorization device.
Alerts when using authorization devices
It is recommended to use an additional sound emitter Beeper when you use authorization devices.
USER MANUAL
. m . . . i
ore informaTion on loader pandorainfo com T is
" slave
To increase securiTy feaTures of The
13
EN