Replacing The Bulb; Maintenance / Cleaning / Care - Auriol Z30094A-D Montage-, Bedienungs- Und Sicherheitshinweise

.../Use / Maintenance / Cleaning / Care

replacing the bulb

Q
WArNINg!
Pull the adapter
any tasks on the product.
j
Release the screws
using a screwdriver (see Figure B).
j
Take off the halogen bulb
Figure B).
j
Retighten the screws

Maintenance / Cleaning / Care

Q
J
TrIC SHOCK! Before doing any work on the prod-
uct, pull the adapter
j
Ensure that the water level never drops below the MIN marking
(inside) wall of water container
j
Fill up or change the "distilled" water when the water level is be-
low the MIN mark (see "Changing the water"). Check the water
level by slightly raising the base
namental stone
mains socket, then the water level is probably too low.
j
Change the "distilled" water at least once a week (see "Chang-
ing the water"). This will prevent algae from forming.
j
Check and clean the tabletop fountain, pebbles
tainer and pump
12
sive or corrosive cleaning agents to do this. Ensure that no foreign
bodies can enter the pump
j
Pour out the water and allow the tabletop fountain to dry com-
pletely if you are going to leave it unused for an extended period
(see "Changing distilled the water").
12 GB
rISK TO LIFE FrOM ELECTrIC SHOCK!
out of the mains socket before performing
11
on the lamp attachment assembly
17
. Insert a new halogen bulb
18
using a screwdriver.
17
WArNINg!
DANgEr TO LIFE FrOM ELEC-
, and the mains adapter
2
at regular intervals. Never use aggres-
8
8
out of the socket.
11
.
12
. If no water flows from the or-
6
11
or the connection hose
1
(see
18
is connected to a
, water con-
13
.
7