LAVOR Pro Comfort XXS 66 BT Handbuch Seite 27

1. SOMMARIO
2. GENERAL INFORMATION
2.1
2.2
2.3 PRODUCT IDENTIFICATION
2.4 SPECIFIC USE
2.5 TECHNICAL MODIFICATIONS
3. SAFETY INFORMATIONS
3.1 BASIC RECOMMENDATIONS
3.2 NOISE AND VIBRATIONS
4. HANDLING INFORMATION
4.1 PACKING LIFTING AND TRANSPORT
4.2 CHECKS UPON DELIVERY
4.3 UNPACKING
4.4 UNBLOCKING THE ELECTROMECHANI-
CAL BRAKE
4.5 LIFTING AND TRANSPORT: MACHINE,
BATTERY AND BATTERY CHARGER
5. TECHNICAL INFORMATIONS
5.1 GENERAL DESCRIPTION
5.1.1 MACHINE
5.1.2 BATTERY
5.1.3 BATTERY CHARGER
5.2.2 BATTERY
5.2.3 BATTERY CHARGER
5.3 BATTERY CHARGER CONFIGURATION
6. INSTALLATION INFORMATION
6.1 BATTERY PREPARATION
6.3 MACHINE PREPARATION
7. OPERATING INFORMATION
7.1 BATTERY CHARGING
7.2 SQUEEGEE AND SPLASH GUARD
ASSEMBLY, DISASSEMBLY AND
ADJUSTMENT
7.2.2 SQUEEGEE DISASSEMBLY
7.2.3 SQUEEGEE BLADES
DISASSEMBLY/ASSEMBLY
7.2.4 SQUEEGEE ADJUSTMENT
7.2.5 SPLASH GUARD
ASSEMBLY/DISASSEMBLY
7.3 ACCESSORY ASSEMBLY/DISASSEMBLY
(BRUSHES, PAD DRIVERS AND ABRA-
SIVE DISKS)
7.4 FILLING AND DRAINING THE DETER-
GENT SOLUTION TANK
7.5 DRAINING THE RECOVERY TANK
7.6 DRIVING THE MACHINE
7.7 WORK METHOD
7.7.1 PREPARATION AND WARNINGS
7.7.2 OPERATING CONTROLS
7.7.3 DIRECT SCRUBBING OR FOR SLIGHTLY
DIRTY SURFACES
MANUAL PURPOSE
TERMINOLOGY
AND SYMBOL
LEGEND
27
7.7.4 INDIRECT SCRUBBING OR FOR VERY
DIRTY SURFACES
7.7.5 POST-SCRUBBING OPERATIONS
8. MAINTENANCE INFORMATION
8.1 TANKS
8.2 SUCTION HOSE
8.3 SQUEEGEE
8.4 ACCESSORIES
8.5 DETERGENT SOLUTION FILTER
8.7.1 PB-ACID
8.8 PERIODIC MAINTENANCE
8.9 RECOMMENDED SPARE PARTS
9. OPERATING CHECKS
9.1 MALFUNCTIONS SELF-DIAGNOSTIC
9.2 PROBLEM SOLVING GUIDE
9.2.1 THE MACHINE DOESN'T WORK
9.2.2 THE MACHINE DOESN'T MOVE
FORWARD
9.2.3 THE BRUSHES DON'T ROTATE
9.2.4 NOT ENOUGH OR TOO MUCH DETER-
GENT
9.2.5 NO SUCTION
9.2.6 INSUFFICIENT SUCTION
9.2.7 THE BRUSH MOTOR OR THE SUCTION
MOTOR DOESN'T STOP
9.2.9 THE BATTERY CHARGER DOESN'T
WORK
9.2.10 THE BATTERIES DO NOT CHARGE OR
DO NOT HOLD A CHARGE