Functional Check Of The Compressor Without Edge Device - Prebena AEROTAINER 245 Originalbetriebsanleitung

WARILY
Damaged pressure lines can be broken, it lead to injury.
ATTENTION!
Damaged pressure lines can be broken and the stream of compressed air-out can inflict property
damage.
Before connecting check the compressor and pressure lines on damages.

Functional check of the compressor without edge device

To ensure a faultless work of the compressor by first starting proceed as follows:
Operate the compressor only in cool, dust-free, dry and well ventilated rooms.
The ambient temperature should not be below 5 °C and above +40 °C.
The slope of bearing surface in across-track and longitudinal directions should not be greater than 15
degrees to avoid damages of the compressor.
Make sure that the minimum distance is complied between the compressor and any possible obstacle to
air flow is 50 cm.
Before starting make sure that voltage and supply frequency correspond to data on the plate with char-
acteristics of the compressor.
ATTENTION!
Operation with power supply with out following above conditions can lead to compressor damage.
Connect the compressor only to appropriate power supply.
ATTENTION!
Pay attention to instructions about possible dangers in the chapter "Safety" beginning from page 5.
Before connecting check the compressor and pressure lines on damages.
Description
17