System Requirements - i-tec U2LAN Gebrauchsanweisung

EN
INTRODUCTION
The USB 2.0 Fast Ethernet Adapter allows user's computer instantly connect to a 10/100
Mbps network through an existing USB port. No need to purchase an extra network card
and share a PCI or Cardbus slot. With compliance with USB 2.0 specification, this adapter
ensures true 10/100 Mbps network speed without any compromise. Besides, compact and
bus-powered design means external power is not required.
FEATURES
• USB 2.0 to 10/100 Mbps Fast Ethernet
• Support both full-duplex and half-duplex operations
• Support Wake-on-LAN function and suspend mode
• Powered by USB port only
• Plug & Play installation
SPECIFICATION
• Ports: USB 2.0 type A Male and RJ-45 for Fast Ethernet cable
• LED indicators: Green, Yellow
• Chipset Asix AX88772B with SRAM for RX/TX packet buffering
• Power: USB Bus Power 5V
• Housing from PVC
• Supported OS : Windows 7 / 8 / 8.1 / 10, macOS 10.6 or higher
• Operation Temperature: 0-70°C
• Storage Temperature: -10-80°C
• Size (L x W x H): 66 x 22 x 15 mm
• Weight: 24 g
• Compliance: CE, FCC

SYSTEM REQUIREMENTS

• Windows 7 / 8 / 8.1 / 10, macOS 10.6 and higher
• macOS 10.6-10.9
• Free USB port (USB 3.0/2.0/1.1)
6
Quick Start / USB 2.0 Ethernet adapter