Introduction..................................................................... 4
Safety..............................................................................5
Assembly...................................................................... 10
Operation...................................................................... 10
Maintenance................................................................. 11
Product description
Husqvarna 115iHD45 is a battery hedge trimmer with an
electrical motor.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Product overview
(Fig. 1)
1. Operator's manual
2. Rear handle
3. Power trigger lockout
4. Front handle
5. Cutter
6. Transport guard
7. Power trigger
8. Control panel
9. Hand guard
10. Battery
11. Battery charger
12. Cord
13. Battery indicator button
14. Battery status
15. Warning indicator
16. SavE button
17. Start/stop button
18. Power on and warning indicator
19. Battery release buttons
Symbols on the product
(Fig. 2)
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
(Fig. 3)
Read the operator's manual carefully and
make sure that you understand the
instructions before you use the product.
(Fig. 4)
Use approved hearing protection and
approved eye protection.
4
Contents
Troubleshooting............................................................ 13
Technical data.............................................................. 14
Introduction
Intended use
Use the product to cut branches and twigs. Do not use
the product for other tasks.
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
yyyywwxxx
xx
Symbols on the battery and/or on the
battery charger
(Fig. 15)
(Fig. 12)
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product agrees with the applicable EC
directives.
The product or package of the product is not
domestic waste. Recycle it at a recycling
station for electrical and electronic
equipment.
Do not expose to rain.
Direct current.
Noise emissions to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
The rating plate shows the serial number.
yyyy is the production year, ww is the pro-
duction week.
Recycle this product at a recycling station
for electrical and electronic equipment. (Ap-
plies to Europe only)
Fail-safe transformer.
779 - 001 - 08.07.2019