Assembly And Adjustments - DeWalt DW030 Bedienungsanleitung

e nglis h

assemBLy and adjUstments

WARnInG! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
installing and removing Battery (fig. 2)
NOTE: This LDM is powered by two LR03 (AAA-size) 1.5 V
instaLLing the Battery Pack
1. Lift up the battery compartment cover (a) as shown in figure 2.
2. Insert two LR03 (AAA-size) batteries into the compartment, placing
the batteries according to + and – icons on the inside of the
compartment.
NOTE: When the battery icon flashes in the LCD display, replace
battery with 2 fresh LR03 (AAA-size) batteries.
attachment of Wrist strap (fig. 3)
Refer to figure 3 for instructions.
oPeration
WARnInG! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
instructions for Use
WARnInG: Always observe the safety instructions and
applicable regulations.
CAUTIOn: Use of controls or adjustments or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
46
batteries.
DC