Exibel WRE6505 v2 Bedienungsanleitung

WRE6505 v2
WiFi Repeater
Art.no 38-8035
Please read the entire instruction manual before using the pro‑
duct and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or
other queries, please contact our Customer Services.
An instruction manual is available to download at
com. Write 38‑8035 in the search field and select "Details" to
find the instruction manual.
Buttons and functions
2
1
1. LAN port for connecting a network cable
2. [ ] WPS button (WiFi Protected Setup)
3. LED indicator/WPS
4. Signal strength meter
GREAT BRITAIN - CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
WPS connection
Connect the repeater to your router/access point
1. Connect the repeater to an electrical
socket. The LED indicator/WPS (4)
will flash.
2. Wait about 1 minute until the blue
LED indicator/WPS shines steadily.
3. Activate the WPS function on your
router or access point.
4. Hold in the WPS button (2) on the receiver for 2 seconds.
clasohlson.
After a few seconds, the LED indicator/WPS will begin
to flash.
5. Wait for about 2 minutes until the LED indicator/WPS on
the repeater and the indicator on the router stop flashing
(the devices are now paired/connected).
Note:
• Once the devices have been paired/connected,
the repeater will transmit the 2.4 GHz signal with the same
network service set identifier (SSID) and password as your
router uses.
• 5 GHz signals are transmitted with the same network
service set identifier (SSID) and password as your router
3
but with the addition of the ".speed" suffix.
Non-WPS connection
1. Connect the repeater to an electrical socket. The LED
4
indicator/WPS (4) will flash.
2. Wait about 1 minute until the blue LED indicator/WPS
shines steadily.
3. Connect your computer to one of the pre‑configured
repeater networks. SSID: EXIBELxxxxxx or
SSID: EXIBELxxxxxx.speed
4. Open your web browser.
The password is 1234.
5. Follow the instructions in the guide.
English
Go to http://zyxelsetup/
Note:
• Once the devices have been paired/connected,
the repeater will transmit the 2.4 GHz signal with the same
network service set identifier (SSID) and password as your
router uses.
• 5 GHz signals are transmitted with the same network
service set identifier (SSID) and password as your router
but with the addition of the ".speed" suffix.
Care and maintenance
• Use a dry cloth to wipe the repeater clean when needed.
• The repeater should be unplugged from the wall socket if it
is not to be used for a long time.
• If you need to reset the repeater to its default factory
settings, hold in the WPS button (2) for 10 seconds until
the LED indicators start to flash.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Rated voltage 100–240 V, 50/60 Hz
Transfer rate 750 Mbit/s
Dual band 2.4/5 GHz
IP address 192.168.1.2
Password 1234
LAN port
WPS support