Connections; Assembly - MYPV AC-THOR 9s Montageanleitung

Connections

Load

connections

Assembly

Remove the wall bracket from the rear of the AC•THOR 9s unit. To do this, slide the lock
underneath to the right.
Then fix the wall bracket to the wall with three screws. Three screws and three wall-plugs are
supplied. If the screws supplied are not suitable for the substrate, suitable screw must be
obtained.
AC•THOR ® 9s Montageanleitung / Assembly Instructions, Version 190716
Ethernet
SD Card
RJ45 Slot
Wall bracket
lock
4 Temp. Relais
sensors 16A
NC W NO
PWM
Mains connection
Signal 3 x 230 V
16