GB
WARNING!
The blades of the clipper attachment are very
sharp when unguarded.
CAUTION!
Care should be taken when using the clipper
attachment without a comb fitted.
To contour the neckline and area around the ears
1. Switch off the groomer.
2. Remove the comb attachment.
3. 3. Switch on the groomer.
4. Position the clipper attachment so that only one edge contacts the hair.
5. Slowly shape the hair around the ears and contour the neckline by positioning the
blades against the neck and moving downwards.
6. For final trimming of the hair, fringe or beard, use scissors.
Cleaning and Care
• Your device be cleaned under running water when no charge processing.
• Unplug the appliance from the mains before you clean the appliance.
• Never hold the mains adapter unit with wet hands when plugging it in or
unplugging it from the socket.
• Always keep the mains adapter and connecting lead dry.
Cleaning with water
Your device can be easily cleaned under a running water. Water temperature should
not be more than 70°C.
• Switch the appliance off and pull out the mains plug from the socket.
• Remove the adjustable cutting length from the appliance.
• Press the cutters set with the thumb towards the back, remove it from the holder and
take it off.
• Ensure that the cutting unit does not fall down.
• Remove remaining hair residue from the shear head with the enclosed cleaning
brush. The cutter set can also be washed under flowing water. Blades are stainless
steel that can be washed under the water.
ULTRACARE
20