Product Description; Use And Operation - Klarstein 10030540 Gebrauchsanleitung

1 Uppter zone NTC point
2 Upper zone light
3 Upper zone fan
4 Exhaust window
5 Light switch
6 Lower zone temperature
7 Upper zone temperature
8 Temperature switch
9 Temperature display
10 Lower zone light
11 Lower zone NTC point
12 Shelf
13 Lower zone fan
14 Exhaust window
15 Lower hinge
16 Foot
17 Upper hinge
18 Glass door
19 Door seal
20 handle
Before first Use
• Remove the exterior and interior packing
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.
• To level your appliance, adjust the front legs at the bottom of the appliance.
Operation
• You can set the temperature as your desire by pressing the button. There are three press-button on the
panel. UP and DOWN to adjust the temperature by 1 °C among 5-10 °C / 10-18 °C.
• You can tune the interior light on or off by pressing the "Light" button.
• Flashing LED = Set Temperature.
• Steady LED = Cabinet Temperature.
7

Product Description

Use and Operation