Commissioning; Filling The Stone Container - Sentiotec Home combi HOME-C60 Montage- Und Gebrauchsanweisung

Instructions for use for the user

5. Commissioning

5.1. Filling the stone container

WARNING!
Risk of fire due to overheating
If the sauna heater is used without sauna stones, the cabin walls will
become extremely hot. This could cause fires.
● NEVER operate the sauna heater without the sauna stones.
The stone basket 1 can be mounted at
two different heights.
Position 2: fewer stones, shorter heating
time, energy saving
Position 3 (set at factory): more stones,
larger amount of water for pouring possible,
creating more steam, longer heating times
The amount of stones suited to your heater can be found in
chapter Technical data (see page 25).
1. Wash the stones thoroughly using water and a brush before use.
Do not use any cleaning additives.
2. Before filling the heater with the sauna stones, check them for foreign objects
and remove any remaining packaging.
3. Place the stones in the stone container and also between the heating rods.
Stack the sauna stones loosely so that air can flow through the gaps.
4. Do NOT allow the heating rods to make contact with one another.
5. Make sure that the sauna stones do not protrude beyond the edge of
the stone container.
p. 16/26
1
2
3