Jung Smart Visu Server Produktdokumentation Seite 89

7.4.4.1 Switch / Dimmer
If required, the function type "Switch / Dimmer" can be depicted by four KNX functions.
Switch:
The "Switch" function (1) is the standard KNX function for simply switching on and off of
switching actuators. In the "Switch" function, a group address can be defined for writing
"Switch" status changes (2) as can a group address for reading "Switch feedback"
feedback (3).
In addition, the current status of a group address can be polled by defining an initialisation
address (4) on starting the system.
The function possesses individualisation options within the icon library (5).
KNX function Selection of the icon library in SV-Control
Switch
SV- SERVER / SV-SERVER-INT
5
Figure 73: Parameters of the "Switch" function
Table 31: Display of the "Switch" function
1
2
3
4
Operating and display element in SV-Home
88 / 150