Herunterladen Diese Seite drucken

Cleaning And Maintenance - Lux Tools 468 319 Originalbetriebsanleitung

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Kehrmaschine_Benzin_468319.book Seite 66 Donnerstag, 21. November 2013 11:08 11
GB
Start the engine
► Starting the motor – p. 64
Starting
NOTICE!
Risk of product damage!
Allow the engine to run warm before starting up.
– Slowly engage and firmly hold clutch lever for travel drive forwards (3) or backwards (4) up
to the stop.
Device starts.
– Slowly engage and firmly hold clutch lever for broom drive (5) up to the stop.
Persistence
– Release clutch lever for travel drive (3, 4).
– Release clutch lever for broom drive (5).
► Switching off the motor – p. 65

Cleaning and maintenance

WARNING!
Risk of injury!
Always switch off engine before all cleaning and maintenance work, allow device to
cool down and remove ignition cable.
Cleaning and maintenance at a glance
Before each use
What?
Check cable of the pull-starter for dam-
age
Check motor oil level
Check screw connections are tight
After each use
What?
Cleaning the device
Every 25 hours of operation
What?
Cleaning the spark plug
66
How?
Visual inspection.
► Checking the motor oil level – p. 67
Hand-tighten the screw connections using the ap-
propriate tool.
How?
► Cleaning the product – p. 67.
How?
► Cleaning/replacing the spark plug – p. 67,

Quicklinks ausblenden:

Werbung

loading