Assembly Of The Grill Unit - Klarstein 10033343 Bedienungsanleitung

EN
18

ASSEMBLY OF THE GRILL UNIT

You do not need any tools or other equipment to assemble the grill.
We have designed the appliance to be so user-friendly that you can set up and operate
the grill in just a few simple steps. The same applies of course to the dismantling of the
appliance to save space when stowing it away. Follow the instructions below.
During assembly, check that the grill and all enclosed materials are intact. If you
discover any defects or damage, which may have been caused by inappropriate
transport, for example, do not operate the appliance under any circumstances. In this
case, please contact customer service.
First remove all packaging material from all parts belonging to the grill. Clean the grill
pan, grate, water bowl and water bowl insert with hot detergent and dry thoroughly
before using for the first time.
First insert the straps located at
the ends of the windbreak (see
figure 1) into the elongated holes
of the grill pan.
Now hook the central lug of
the windbreak also into the slot
provided for this purpose (see
figure 2).
The windbreak is now installed.
Step 1: Install windscreen
Figure 2 Figure 1