General Safety Tips - VGE Blue Lagoon BL220 Bedienungsanleitung

BL220 PERISTALTIC PUMPS WITH BUILT-IN PH/RX METER
WARNINGS
EN
HOW TO SHIP THE PUMP
To send back the device for repairing or calibration purposes, proceed as follows:
• Fill the module "REPAIR REQUEST AND DECONTAMINATION DECLARATION" supplied with this
manual, and include it in the transport documentation.
• Clean the device properly, to eliminate any hazardous residuals.

GENERAL SAFETY TIPS

Failure to follow instructions can cause damage to the equipment and, in extreme cases, to people.
The manufacturer can modify the instrument or the technical manual without advanced notice.
4 | BL220 PERISTALTIC PUMPS
This manual is dedicated to the technical personnel responsible of the installation,
management and maintenance of the plants. The manufacturer assumes no
responsibility for damages or malfunctions occurring after intervention by non-
authorized personnel, or not compliant with the prescribed instructions.
Before performing any maintenance or repair action, ensure that the system is
electrically and hydraulically insulated.
Dispose of waste material and consumables accordingly with local regulations.
WARNING! Before performing any operation on the pump, unplug the pump and
discharge the liquid from the pump head and tubes. Never operate on working pump.
During maintenance and repair of parts that normally become in contact with
chemicals. The pump has to be handled by qualified personnel only. Always use original
spare parts for maintenance.