Trevi RR 504 BT Gebrauchs- Und Installationshandbuch Seite 11

RR 504 BT
7. Press Volume button (18) to the desired volume level.
Play / Pause mode
- To interrupt, press the " Play/Pause" button (10) once, and the playing time will be flashing on the LCD display (8).
- Press again to resume normal playback.
Stop mode
- If " Stop" button (9) is pressed during play or pause mode, system will go to stop mode.
Skip mode (skip up / skip down )
- During play or pause mode, if " skip up " button (20) is pressed. It will go to next track and display the track no. and then remain
the play or pause mode.
- During play or pause mode, if " skip down " button (20) is pressed. It will go to the previous track, original track no. is display
and remain the play or pause mode.
ID3 function
- Press the Info/Delete button (16) repeatedly during playback of MP3 file, the LCD display (8) show " FILE - ... ", the song file/
album/song/artist name is being displayed in sequence . Press the Info/Delete button again to disable the function.
Remark:
- In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (8) when press
the ID3 button.
- No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.
- The system support only English and Arabic number for ID3 function.
Play Mode
Press the " TS / Play Mode " button (4) during playback to select repeat (one/all tracks or a folder), intro playback or random function:-
Repeat play
You can listen the desired track or folder or whole disc repeatedly by this function.
Intro play
You can listen to the first 10 seconds of all tracks by this function.
Random play
You can listen all the tracks in a random order by this function.
Remark
- The system can detect and read the file under MP3 format only at USB mode but not other music file format.
- If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 player may not
be able to play via the USB socket. This is not a malfunction of the system.
- USB port does not support connection with USB extension cable and is not designed for communication with computer directly
Removing of USB
To remove the USB, turn off the power or switch the function mode to either Tape, Aux or Tuner first. Un-plug the USB by pulling it
out from the USB socket directly, straightly without bending.
USB programming
Up to 20 tracks can be programmed for disc play in any order. Before use, be sure to press the " stop " button (9).
1. Set in USB mode & stop the USB playback.
2. Press the " Memory " button (5) and " MEMORY " will appear on LCD display (8).
3. Select a desired track by pressing skip up or down button (20). Press " Pre / Folder Up-Down" to select folder.
4. Press the " Memory " button (5) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press " Play/Pause " button (10) to play in assigned order.
7. Press " Stop " button (9) to stop playback, press Stop button again to clear all stored memory.
ENGLISH
11