Beper BT.001R Betriebsanleitung Seite 10

Toaster Use instructions
DESCRIPTION Fig.1
1 – Toster sandwich cage
2 – Slots
3 – Manual timer dial – 6 positions
4 – Removable crumb tray
TOASTING INSTRUCTIONS
USE
Insert pieces of bread with the sandwich cage , make sure the bread does not touch the extremity
of the cage.
Plug the cord supply into the socket.
Insert the sandwich cage into the toaster. Turn on the manual timer dial and choose time and toa-
sting level desired between 5 levels.
The toaster is working and stop automatically when the timer is over.
If bread is not enough toasted, select higher toasting level, or if it is too much toasted, select lower
one.
FOR BETTER TOASTING
When used for the first time, do not put bread into the toaster; that will allow to the heat resistance
to pre-heat and burn manufacture dust.
To get better results, use same thickness, size and freshness piece of bread.
Do not put food that could make juice or other, in order to prevent from damages or fire and make it
hard to clean. The slide-out crumb tray and the sandwich cage must always be cleaned after each
use. Select lower toasting level if:
The bread is dry (fresh bread toast more quickly);
The bread piece is thin (biggest piece of bread toast less quickly).
To get homogeneous toasting, it is recommended to wait at least 30 seconds for toasting again to
reset the commands.
CLEANING AND CARE OF THE TOASTER
Always unplug the cord supply from the socket before cleaning or care.
Let the toaster to cool.
The external part of the toaster can be cleaned with a smooth cloth.
Do not use alcohol, abrasive detergents or every detergent that could damage the toaster.
Do not immerse into water. After use, unplug the cord supply from the socket and let the toaster to
cool. If there remain embedded pieces of bread, unplug the cord supply from the socket, turn over
and slightly shake the toaster. Do never touch the parts of the toaster with cutting utensils, especially
inside the slots.
10