Main Menu Guide; General Settings; Favorite List Manager; Channel Manager - Radix DTR-9000TWIN Bedienungsanleitung

DIGITAL TERRESTRIAL RECEIVER DIGITAL TERRESTRIAL RECEIVER
Timer Recording
• Channel
Select the channel you want to record. Use the LEFT / RIGHT buttons to select the channel.
• Start Date
Set the start date (Day/Month/Year) of the program you want to record. Use the Numeric buttons to set
the recording start date.
• Start Time
Set the start time (Hour/Minute) of the program you want to record. Use the Numeric buttons to set the
recording start time.
• Duration
Use the Numeric buttons to set the recording time duration.(Hour/Minute)
• Type
Set the type (Once/Daily/Weekly) of the program you want to record. You can record the program once
or daily at the same time or weekly at the same time. Select the type accordingly. Use the LEFT /
RIGHT buttons to select the program type.
• Recording
Starts the recording according to the above
settings. Press the OK button.
GB GB
After the settings are completed, select
Recording and then press the OK button. If
the channel you selected has been locked, the
Password Input screen appears. Enter the
password.
You can check the timer recording settings
from the Recording List.
• A message appears 1 minute before the recording start time, asking you whether or not to proceed
with the recording. To proceed with the recording, press the OK button. Otherwise, press the Exit button.
• Even if the power is turned off, the Receiver will automatically power on at the recording start time to
proceed with the recording. When the recording ends, it will return to its previous state.
• Once the recording has started, only the channel that is currently being recorded will be shown. During
recording, none of the buttons except the POWER button will respond. REC appears on the front
panel display of the Receiver.
• If the programme type is set to Once , it will be deleted from the Recording List after the recording
ends.
If the programme type is set to Daily or Weekly , the channel recording information will be changed
to the next scheduled date and then stored.
16
• EPG Recording
This function enables you to use the EPG time information to
Press the EPG button.
Use the CH UP and CH DOWN buttons and the LEFT / RIGHT buttons to select the time and the
channel.
Press the TIMER button. The selected recording is added to the Timer List.

8. Main Menu Guide

8.1 General Settings

Refer to Section 5.2 on General Settings for details.

8.2 Favorite List Manager

Refer to Section 7.2 on Favorite List Manager for
details.

8.3 Channel Manager

Refer to Section 7.1 on Channel Search for details
on Auto Search, and Manual Search.
We will take a look at other functions.
Reinstallation
Use this to restore all settings to their default values.
Press the MENU button on the remote control.
Select Channel Manager .
Select Reinstallation .
When the Enter Password message appears, enter the password.
The settings (such as channel information and language) on the Receiver will be restored to their
defaults. However, the Receiver cannot revert to its default state if the password has been changed.
When you perform Reinstallation of the Receiver, the Receiver will be initialized in one of two ways. The
difference is determined by the Receiver model type .
• Settings will be restored to their factory default settings and channel information programmed at the
factory will remain unchanged.
• Settings will be restored to their factory default settings and channel information programmed at the
factory will also be deleted.
DTR 9000TWIN DTR 9000TWIN
Main Menu Guide
book a recording on the VCR.
GB GB
17