Disposal Of Packaging Materials - Whirlpool W55ZM 112 W CH Gebrauchsanweisung

not working properly, or if it has been
damaged or dropped.
If the supply cord is damaged, it
must be replaced with an identical one
by the manufacturer, its service agent
or similarly qualified persons in order to
avoid a hazard - risk of electric shock.
WARNING: Do not locate multiple
portable socket-outlets or portable
power supplies at the rear of the
appliance.
CLEANING AND MAINTENANCE
WARNING: Ensure that the
appliance is switched off and
disconnected from the power supply
before performing any maintenance
operation; never use steam cleaning
equipment - risk of electric shock.
Do not use abrasive or harsh
cleaners such as window sprays,
scouring cleansers, flammable
fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers
containing petroleum products on
plastic parts, interior and door liners
or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning
tools.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100% recyclable and is
marked with the recycle symbol
The various parts of the packaging must therefore be
disposed of responsibly and in full compliance with
local authority regulations governing waste disposal.
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured with recyclable or
reusable materials.
Dispose of it in accordance with local waste disposal
regulations. For further information on the treatment,
recovery and recycling of household electrical
appliances, contact your local authority, the collection
service for household waste or the store where you
purchased the appliance. This appliance is marked
in compliance with European Directive 2012/19/EU,
Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly,
you will help prevent negative consequences for the
environment and human health.
The symbol
documentation indicates that it should not be
treated as domestic waste but must be taken to an
appropriate collection centre for the recycling of
electrical and electronic equipment.
ENERGY SAVING TIPS
Install the appliance in a dry, well ventilated room
far away from any heat source (eg. radiator, cooker,
etc.) and in a place not exposed directly to the sun. If
required, use an insulating plate.
To guarantee adequate ventilation follow installation
instructions.
Insufficient ventilation at the back of the product
increases energy consumption and decreases cooling
efficiency.
Frequent door opening might cause an increase in
energy consumption.
The internal temperature of the appliance and the
energy consumption may be affected also by the
ambient temperature, as well as location of the
appliance. Temperature setting should take into
consideration these factors. Reduce door opening to
minimum.
You can increase storage capacity of frozen food by
removing baskets and, if present, Stop Frost shelf.
Do not worry about noises coming from the
compressor which are normal operation noises.
Keep the product away from heat sources.
Fast Freeze (if present) can be used for optimum
appliance performance, 24 hours before placing fresh
food in the freezer. Please follow the instructions
contained in the Quick Start Guide to activate/
deactivate the function.
After placing fresh food in the freezer, 24 hours on
Fast Freeze function is generally sufficient; at the end
of this period, switch off the Fast Freeze button (if
provided). For appliances without this button, turn the
.
thermostat to its original position.
Attention: In order to save energy, when freezing
small amounts of food, the fast freeze function can be
deactivated after a few hours.
The user shall maintenance the refrigerating appliance
in according to CLEANING AND MAINTENANCE
chapter
EN - 18
on the product or on the accompanying