Instructions For Assembly; Handling The Equipment - Kettler Golf C2 Montageanleitung

– EN –

Instructions for Assembly

RISK!
Ensure that your working area is free of possible sources
!
of danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
Ensure that you have received all the parts required (see check
■
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult
■
person. If in doubt call upon the help of a second person, if
possible technically talented.
Please note that there is always a danger of injury when wor-
■
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.

Handling the equipment

ATTENTION!
It is not recommended to use or store the appa-
!
ratus in a damp room as this may cause it to rust. Please ensure
that no part of the machine comes in contact with liquids (drinks,
perspiration etc.). This may cause corrosion.
Before using the equipment for exercise, check carefully to en-
■
sure that it has been correctly assembled.
Before beginning your first training session, familiarize yourself
■
thoroughly with all the functions and settings of the unit.
A slight production of noise at the bearing of the centrifugal
■
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling re-
sult from engineering and are absolutely safe.
Maintainance – Service – Spare Parts
Damaged components may endanger your safety or reduce the
■
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
To ensure that the safety level is kept to the highest possible
■
standard, determined by its construction, this product should be
serviced regulary (once a year) by specialist retailers.
Please ensure that liquids or perspiration never enter the ma-
■
chine or the electronics.
Spare parts order
When ordering spare parts, always state the full article num-
■
ber, spare-partnumber, the quantity required and the S/N of
the product (see handling).
Example order: Art. no. 07689-200 / spare-part no.
67001415 / 2 pieces / S/N ....................
The fastening material required for each assembly step is shown
■
in the diagram inset. Use the fastening material exactly as in-
structed.
First, please screw all parts loosely together and make sure they
■
are properly positioned. Turn the self-locking nuts, first by hand,
until resistance is felt, continuing subsequently against the resi-
stance (security clamp) with an appropriate tool, according to
the indicated torque, until firm. Check all screw/bolt connec-
tions for firm fit according to the assembly step. Attention: self-
locking nuts which are loosened once again will become
unusable (destruction of clamping system) and must be replaced
with new ones.
For technical reasons, we reserve the right to carry out prelimi-
■
nary assembly work (e.g. addition of tubing plugs).
The exercise cycle has a magnetic brake system.
■
To operate correctly, the pulse function requires a minimum vol-
■
tage of 2,7 volts (only for computers working with batteries).
The equipment is dependent of revolutions per minute.
■
Before use, always check all screws and plug-in connections as
■
well as respective safety devices fit correctly.
Always wear suitable shoes when using.
■
For a comfortable training position please adjust the handlebar
■
andsaddle position to your body height.
Nobody may be in the moving range of a training person du-
■
ring training
Waste Disposal
KETTLER products are recyclable. At the end of its use-
ful life please dispose of this article correctly and safely
(local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 591901
+44 1527 62423
e-mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
e-mail: sales@kettler.co.uk
5