POWERSUPPLY ____________________
Charging
The power adapter has an auto
matic 100 240 V∼, 50/60 Hz
transformer which works anywhere
in the world. This allows it to adjust
to all international AC voltages.
Only use the power adapter
supplied for charging.
1
Insert the charging plug
the socket at the back of the
charging stand
Note
The groove on the charging plug
7
7
must match with the notch in
F
the charging stand
2
Plug the power adapter
the wall socket. Place the appli
ance in the charging stand
– Charge indicator LED
up blue.
– When the appliance is fully
charged, the charge indicator
LED
disappears.
C
3
Pull the power adapter
the wall socket.
4
Remove the appliance from the
charging stand
into
F
.
D
socket.
D
into
E
.
D
lights
C
out of
E
.
D
Notes:
Before first use or if you have not
7
7
used the appliance for a long
time, charge up the batteries
completely (about 14 hours).
The charging time afterwards is
approximately 8 hours.
This appliance is designed to
7
7
charge and operate perfectly
between 15°C and 40°C.
If you switch on the appliance
7
7
while it is charging, charging will
be interrupted.
When fully charged, the appli
7
7
ance works for around
50 minutes. It is not advisable to
charge the batteries after each
use. Generally, you should only
charge the batteries when they
are completely discharged. This
increases their service life.
ENGLISH � 5