BigRep ONE
›
Log in if necessary
›
Connect if necessary
›
Click on Connect button, in drop down menu on the top right corner of the
screen and confirm.
Standard Operation
Load Object
›
Open the Print Menu
›
Connect the USB storage device with the G-Code to the printer
›
Select Load File and chose the file you would like to print. Click on Open
›
Now it is possible to remove the USB stick
Initiating the Printing Process
›
Go to the Temperature Menu and heat up the bed and the extruders
Chap. 5 Interface
&
›
Check if the required filament has been loaded. Change filament if neces-
sary.
&
›
Go to the Print Menu and click on the Start Print button of the G-Code to
be printed.
›
Please ensure that the printing process initiates correctly.
Canceling / Pausing the Printing Process
›
A visual signal on the UI notifies you when the print is completed.
Chap. 7.1 Change Filament
Operation and Control
6
73