7.2.12 Auto Mode
There are 3 models for the unit, Heating only, Auto mode(heating and cooling switch), Cooling only.
You can switch Heating only and Auto mode by pressing
Operation logic of Auto Mode
Set water temperature
(Tset)
Tset (eg: 28℃)
Tset (eg: 28℃)
7. Start-up of the Heat Pump
Current water in
temperature
(Tset +2℃)
Tset +2℃ (eg:30℃)
Tset-2℃(eg: 26℃)
- 35 -
for 5 seconds, no matter the unit is on or off.
light together
light on
Current working
mode
Heating mode
Cooling mode
After 3 minutes or above,
it will switch to
Cooling mode
Heating mode