Software Upgrade; Troubleshooting & Faq - Jabra Cruiser Bedienungsanleitung

CALLER ID
During an incoming call Jabra CrUISEr will access the phone book
in the mobile phone and announce the name of the caller . If your
phone does not support phonebook access profile (PbaP) it will
announce the number of the caller .

SOFTWARE UPGRADE

It is possible to upgrade the speakerphone software .
Go to www .jabra .com and follow the instructions .
tRoUBLesHootInG & FAQ
I hear crackling noises
- bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device .
It is designed for the speakerphone and the connected device
to be used within 33 feet (10 meters) of each other, with no
major objects in the way (walls, etc .) .
I cannot hear anything in my speakerphone
- Increase the volume in the speakerphone .
- Ensure that the speakerphone is paired to a device that is playing .
- Make sure your phone is connected to the speakerphone by
tapping the answer/End button .
I am having pairing problems
- You may have deleted your speakerphone pairing connection
in your mobile phone . Follow the pairing instructions .
I want to reset the pairing list in my speakerphone
The speakerphone registers a list of up to 7 mobile phones .
To remove the list, press and hold the answer/End button, Volume
up button and FM button at the same time . a beep indicates the
list was removed from the speakerphone memory . The next time
you power on, the speakerphone will go into pairing mode as the
first time you powered your new Jabra CrUISEr on .
Jabra CrUISEr
13