Reverse Function - Cramer 2100386 Bedienungsanleitung

Reverse function

•
If grass has winded up around the trimmer head or grass blade, simply
press the reverse button and do the two step operation for starting the
trimmer head again. The trimmer head will now reverse slowly for a shorter
period of time to help the user to come loose from the stuck situation.
4-Step speed limiter
•
4-step speed limiter function can be used to set the preferred rpm of the
trimmer head. This feature helps the user to hold the rpm at a suitable level
and by that saving run time. The limiter is adjusted by pushing the speed
button (6) forward one step at the time.
WARNING!
Noise. A degree of noise from the machine is not avoidable. Route
noisy work is to be licensed and limits for certain periods. Keep
rest periods and they may need to restrict the working hours to a
minimum. For their personal protection and protection of people
working nearby, an appropriate hearing protection shall be worn;
Vibration. Always wear safety and anti-vibration glove.
Excessive vibration may cause white finger disease or carpal
tunnel syndrome. If you notice an unpleasant sensation or skin
discoloration during use of the machine on your hands once you
stop working. Place an adequate work breaks. And continual and
regular users should monitor closely the condition of their hands
fingers.
WARNING!
Contact with the trimmer cutting head while operating can result
in serious personal injury.
Advancing line (see Figure 6)
While the string trimmer is operating, the cutting line gets worn down and
becomes shorter. This trimmer is equipped with bump feed line advancement,
which advances additional line once the head is bumped on the ground while
rotating. The cutting blade will cut the line to keep an accurate cutting swath
Cutting Tips (see Figure 7)
•
Keep the trimmer tilted toward the area being cut; this is the best cutting
area.
• The trimmer will cut better when moved from left to right across the area
to be cut; it is less effective when moved from right to left.
• Use the tip of the cutting line to do the cutting; do not force cutting head
into uncut grass.
•
Wire and picket fences cause extra cutting line wear, even breakage. Stone
and brick walls, curbs, and wood may wear cutting line rapidly.
•
Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts
can easily be damaged by the cutting line.
Line cut-off blade (see Figure 7)
This trimmer is equipped with a line cut-off blade on the grass deflector. For best
cutting, advance line until it is trimmed to length by the line cut-off blade. Advance
line whenever you hear the engine running faster than normal, or when trimming
efficiency diminishes. This will maintain best performance and keep line long
enough to advance properly.
WARNING!
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.
WARNING!
To avoid serious personal injury, always remove the battery pack
from the tool when cleaning or performing any maintenance.
EN
9
cramer.eu