Getting To Know Your Quantum P70Ix; Paper Static - GBC Quantum P70iX Bedienhandbuch

2. Getting to Know your Quantum P70iX

PAPER STATIC

External factors can affect performance of your P70iX. These factors include
customer requirements for hole quality, throughput materials (paper/transparen-
cies/covers), toner coverage on the printed page, and environmental factors.
Static in the paper can result in poor performance. If your P70iX runs a fresh
ream of clean white paper but has trouble with your printed job, it may be due to
static. The following tips might help you to correct this problem.
Suggestions for static: If you're P70iX Automatic Punch is having trouble
running certain jobs, it may be due to excessive static build-up in the
paper. Here are some suggestions that may help to minimize the static
effect.
1. Fan the paper before loading it into the P70iX. Do not jog the paper; this
will only cause more static build-up.
2. Slow the speed down on the P70iX. This will give the paper more time to
settle down into the die.
3. Consider the purchase of a room humidifier to add moisture into the air.
Dry air helps to produce more static.
4. Move your punching operation to an environmentally controlled room.
5. Pay close attention to seasonal conditions. Procedures you follow in the
hot humid days may need to be modified during dry winter months when
static is most common.
6. Consider storing your unwrapped paper jobs in very large Tupperware
type containers to retain the moisture. Using these containers along with
humidor type products can actually reintroduce moisture into the paper
that was lost during the fusing process.
7. Contact your copier/printer service department and enquire as to the
possibility of lowering your fuser temperature.
9