Accessories; Unpacking - GMC OS187 Bedienungsanleitung

d. Power tools are dangerous in the hands of
untrained users. Store power tools out of reach of
children, and do not allow persons who are unfamiliar
with the product or these instructions to operate the
power tool.
e. Maintain power tools. Check for misalignment,
binding or breakage of moving parts, and any
other condition that may affect the operation of the
power tool. If damaged, have the power tool repaired
before use. Accidents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits in
accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Failure to use the tool
for its intended purposes could result in a hazardous
situation and may invalidate the warranty.
5. SERVICE
a. Have your power tool serviced by a qualified repair
technician, using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
.

Accessories

• 1 x 80 Grit hook & loop sandpaper sheet
• Sandpaper hole punch
• Dust extraction adaptor
• Dust canister
• Spare set of carbon brushes
• Instruction manual

Unpacking

Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
5
GB