Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Residual Risks - profiline YPL 183-2 KIT Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

21
Place of installation
Set up the compressor on an even surface.
Attention!
22
This device can be used by children from 8
years of age as well as by persons with reduced
physical, sensory or mental capabilities or with
a lack of experience or knowledge, if they are
supervised or if they have been trained in the
safe use of the device and understand the re-
sultant hazards.
Children may not play with the device.
Cleaning and maintenance may not be carried
out by children.
23
Supply hoses at pressures above 7 bar should be
equipped with a safety cable (e.g. a wire rope).
Avoid over-stressing the piping system by using
24
flexible hose connections to prevent kinking.
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed
air and blasting guns
• The compressor pump and lines can become very
hot during operation. Touching these parts will burn
you.
• The air which is sucked in by the compressor must
be kept free of impurities that could cause fires or
explosions in the compressor pump.
• When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebound-
ing hose.
• Wear safety goggles when working with the blow-
out pistol. Foreign bodies or blown off parts can
easily cause injuries.
• Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of in-
jury!
Safety information for paint spraying
• Do not process any paints or solvents with a flash
point below 55° C. There is a risk of explosion!
• Do not heat up paints or solvents. There is a risk
of explosion!
• If hazardous liquids are processed, wear protec-
tive filter units (face guards). Also, adhere to the
safety information provided by the manufacturers
of such liquids.
• The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must
be observed.
• Additional protective measures are to be under-
taken if necessary, particularly the wearing of suit-
able clothing and masks.
• Do not smoke during the spraying process and/or
in the work area. There is a risk of explosion! Paint
vapors are easily combustible.
• Never set up or operate the equipment in the vicin-
ity of a fire place, open lights or sparking machines.
16
16
GB
• Do not store or eat food and drink in the work area.
Paint vapors are harmful to your health.
• The work area must exceed 30 m3 and sufficient
ventilation must be ensured during spraying and
drying. Do not spray against the wind. Always ad-
here to the regulations of the local police authority
when spraying combustible or hazardous materi-
als.
• Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC pres-
sure hose.These media will destroy the pressure
hose.
Do not lose these safety instructions

Technical data

Mains connection
Motor rating W
Operating mode
Compressor speed min
-1
Operating pressure
Theoretical intake capacity
(l/min)
Sound power level L
WA
Uncertainty K
WA
Protection type
Protection class
Weight of the unit in kg
The noise emission values were measured in ac-
cordance with EN ISO 3744.
Wear hearing protection.
The effects of noise can cause a loss of hearing.

Residual risks

Comply with the stipulated maintenance and safety
instructions in the operating instructions.
Remain attentive at all times when working and keep
third parties at a safe distance from your work area.
Even when the device is being used properly, there
will always be certain residual hazards that cannot
be completely ruled out. The following potential haz-
ards can arise due to the type and design of the
device:
• Unintentional starting up of the product.
• Damage to hearing if the stipulated hearing pro-
tection is not worn.
• Dirt particles, dust etc. can get into the eyes or
face despite wearing safety goggles.
• Inhaling swirled up particles.
220 - 240 V~ 50 Hz
max. 1100
S3 15%
3750 min
-1
approx. 8 bar
approx. 180
96 dB(A)
1.9 dB
IP20
II
5.5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis