Specifications; Maintenance - GBC CombBind C800Pro Bedienungsanleitung

Specifications

Operation Mode
Max. Punch Capacity per lift (80 gsm)
Max Punch Capacity Foils/PVC Covers
Max. Approx. Binding Capacity (80 gsm)
Paper Formats
Max Binding Element Cap
De-Selector Pins
Comb Size Selector
Margin Depth Selector
Machine Dimensions mm (HxWxD mm)
Weight
Voltage
Setting up
Attach the handle to the machine on the left side and push in firmly
1
to secure.
Turn the power switch on (Located on right side of machine.) Allow
2
30 seconds for motor to reach full speed. In cold weather, allow
machine to reach room temperature before turning power on (fig. 1).
Machine reset button: If the machine should require resetting,
3
please wait 1 min before pushing the reset button
Punching
Put sheets flush into the machine (use the side guide to adjust the
1
position of the document before punching) (fig. 2).
2 Step on the foot pedal to punch
Note: The black knob on the right side of the machine is used to
select the margin depth. This feature is ideal for thicker documents
that require wider margins for easy page turning and more secure
binding.

Maintenance

Always remember to regularly empty the drawer of clippings (fig. 9).
Guarantee
Operation of this machine is guaranteed for two years from date of
purchase, subject to normal use. Within the guarantee period, Acco
Brands Europe will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use for
inappropriate purposes are not covered under the guarantee. Proof
of date of purchase will be required. Repairs or alterations made by
Register this product online at www.accoeurope.com
4
GBC CombBind C800Pro
Electric
20
2 x (0.2mm)
450
A4, A5, US Letter,
51mm
Full 21 disengageable
3
3
420 x 385 x 295
22.5kg
230V 50 Hz AC
Binding
Place binding element, open side up, behind metal fingers (fig. 3).
1
Pull handle forward to open rings (fig. 4).
2
Insert paper vertically, front cover facing you (fig. 5).
3
Lay down paper horizontally (fig. 6).
4
Return handle to upright position to close rings.
5
Lift vertically to remove bound document (fig. 7).
6
Note: The black knob on the left hand side of the machine can be
set to lock in comb opening settings. The handle stops automatically
at the same position each time for quicker operation during long
binding runs. Simply turn the knob clockwise to open, pull handle to
desired opening, then turn the knob counter-clockwise to lock (fig.
8).
Custom Binding
CombBind C800Pro has 21 de-selectable punching pins which make
it possible to punch virtually any length document. Simply select or
deselect the pins to adjust the punching pattern as required.
persons not authorised by Acco Brands Europe will invalidate the
guarantee. It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect the legal rights
which consumers have under applicable national legislation governing
the sale of goods.
Location of controls
1 Punching Pedal
2 Comb Opening Handle
3 Comb Opening Teeth
4 De-selectable punching pins
5 Punching Slot
6 Paper Edge Guide
7 On/Off Switch
8 Comb Size Selector
9 Clippings Drawer
J Margin Adjuster
K Comb Lock
L Machine re-set button
G